Toyota Sienna Quiz
Transfer

Removal

In this manual: Transfer
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
~1min read
1special tools

1. REMOVE TRANSFER CASE NO.1 PLUG (See page TF-8)

2. REMOVE TRANSFER DRAIN PLUG

(a) Remove the transfer drain plug, drain gasket and bleed transfer oil.

3. REMOVE EXHAUST PIPE ASSEMBLY

HINT: (See page EX-8)

4. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

HINT: (See page PR-3)

5. REMOVE TRANSFER EXTENSION HOUSING TYPE T OIL SEAL

REMOVE TRANSFER EXTENSION HOUSING TYPE T OIL SEAL

(a) Using SST(s), remove the transfer extension housing type T oil seal from the transfer extension housing sub- assembly.

SST 09308-00010

NOTICE: Be careful not to damage the oil-seal-fitted surface and the inside surface of the bush.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.