Settings display

The settings of the following items can be changed, refer to

• Language
  Select to change the language on the display.
• Units
  Select to change the unit for measure of the fuel consumption and outside temperature.
• Eco Driving Indicator Light Select to activate/deactivate the Eco Driving Indicator Light.

switch settings
You can register 1 screen as the top screen. To register, press and hold while the desired screen
is displayed.

• Route guidance display of the navigation system-linked system (if equipped)
• Incoming call display of the hands-free phone system
• Cruise control operation display
• Instrument panel brightness adjustment display
• Shift position display

• Accent color
  Select to change the accent colors on the screen, such as the cursor color.
• Speed limit display (if equipped) Select to set the display of speed limit information stored in the navigation system to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off. If enabled, the speed limit caution indicator will come on if the vehicle speed exceeds the displayed speed limit.

  The display may not be available for some regions.

• Maintenance Reset
  Select to reset the maintenance data
• Initialization
  Registered or changed meter settings will be deleted or returned to their default setting.

Pop-up display

In some situations, such as when a switch operation is performed, a pop-up display, such as the operating cruise control switch, will be temporarily displayed on the multi-information display.

The pop-up display function can be set on/off.

Setting display automatic cancelation

In the following situations, setting display in which the settings can be changed through the meter control switch will automatically be turned off.

• If a warning message appears while the setting display is displayed
• When the vehicle begins to move while the setting display is displayed

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.

Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.