Camera Heater

1. REMOVE FORWARD RECOGNITION CAMERA

Click here

2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:

Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.

(a) Disconnect the connector. NOTICE: Do not pull the harness forcibly when disconnecting the connector.

(b) Disengage the connector clamp.

(c) Disengage the 2 guides to disconnect the wire harness.

(d) Disengage the claw in the direction indicated by the arrow (1) in the illustration.

Heater Area

NOTICE:

Do not press the heater area.

(e) Disengage the guide in the direction indicated by the arrow (2) in the illustration to remove the forward recognition with heater hood sub-assembly.

1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:

Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.

Heater Area

(a) Engage the guide in the direction indicated by the arrow (1) in the illustration.

(b) Engage the claw in the direction indicated by the arrow (2) in the illustration.

NOTICE:

Do not press the heater area.

(c) Engage the 2 guides to connect the wire harness to the forward recognition bracket.

(d) Engage the connector clamp to install the forward recognition with heater hood sub-assembly.

(e) Connect the connector.

2. INSTALL FORWARD RECOGNITION CAMERA

Click here