Cruise Control

Cruise Control Main Switch

~1min read
010203040502.42N·mlb·ft
Tightening torque found on this page
Components COMPONENTS ILLUSTRATION Removal Removal REMOVAL PROCEDURE

1. REMOVE STEERING PAD ASSEMBLY

(See page 2. REMOVE CRUISE CONTROL MAIN SWITCH 2. REMOVE CRUISE CONTROL MAIN SWITCH )

2. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector and remove the 2 screws.

(b) Remove the cruise control main switch from the steering wheel.

Installation INSTALLATION PROCEDURE

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch with the 2 screws and connect the connector.

Torque:

2,4 N·m {24 kgf·cm, 21 in·lbf}

2. INSTALL STEERING PAD ASSEMBLY

(See page Cruise Control System(for 2gr-fks) Cruise Control System(for 2gr-fks) )

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.