Engine Immobiliser

Certification Ecu

~1min read
010203040506.55N·mlb·ft
Tightening torque found on this page
Components COMPONENTS ILLUSTRATION Installation Installation INSTALLATION PROCEDURE

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.

Torque:

6,5 N·m {66 kgf·cm, 58 in·lbf}

(b) Engage the clamp to install the wire harness.

(c) Connect the 3 connectors.

2. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

(See page ) ) )

Removal REMOVAL PROCEDURE

1. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

(See page ) ) )

2. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the 3 connectors.

(b) Disengage the clamp to separate the wire harness.

(c) Remove the 2 nuts and certification ECU (smart key ECU assembly).

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.