Engine Immobiliser
Transponder Key Amplifier
In this manual: Engine Immobiliser
~1min read
Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE
Installation INSTALLATION PROCEDURE
1. INSTALL TRANSPONDER KEY COIL
(a) Engage the 2 claws to install the transponder key coil. |
![]() |
(b) Connect the connector.
2. INSTALL UPPER STEERING COLUMN COVER
(See page
)
3. INSTALL LOWER STEERING COLUMN COVER
(See page
)
1. REMOVE LOWER STEERING COLUMN COVER
(See page
)
2. REMOVE UPPER STEERING COLUMN COVER
(See page
)
3. REMOVE TRANSPONDER KEY COIL
(a) Disconnect the connector. |
![]() |
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the transponder key coil.
Text in Illustration*a |
Protective Tape |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

