Door Control Receiver
Removal REMOVAL PROCEDURE
1. REMOVE ROOF HEADLINING ASSEMBLY (for Double Cab)
(See page
)
2. REMOVE ROOF HEADLINING ASSEMBLY (for Access Cab)
(See page
)
3. REMOVE DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)
(a) Disconnect the connector. |
![]() |
(b) Remove the bolt.
(c) Disengage the 2 hooks to remove the door control receiver.
4. REMOVE ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)
(a) Disconnect the connector. |
![]() |
(b) Remove the bolt.
(c) Disengage the 2 hooks to remove the electrical key and TPMS receiver assembly.
Installation INSTALLATION PROCEDURE1. INSTALL DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)
(a) Engage the 2 hooks to install the door control receiver.
(b) Install the bolt.
(c) Connect the connector.
2. INSTALL ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)
(a) Engage the 2 hooks to install the electrical key and TPMS receiver assembly.
(b) Install the bolt.
(c) Connect the connector.
3. INSTALL ROOF HEADLINING ASSEMBLY (for Double Cab)
(See page
)
4. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab)
(See page
)
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.

