Ac60e Automatic Transmission / Transaxle
Extension Housing Rear Oil Seal
In this manual: Ac60e Automatic Transmission / Transaxle
~1min read
2special tools
Components COMPONENTS ILLUSTRATION
Replacement REPLACEMENT PROCEDURE
Replacement REPLACEMENT PROCEDURE
1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(See page
)
2. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL
(a) Using SST, remove the automatic transmission extension housing oil seal. SST: 09308-00010 |
![]() |
3. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL
(a) Coat the lip of a new automatic transmission extension housing oil seal with MP grease.
(b) Using SST and a hammer, drive in the automatic transmission extension housing oil seal. SST: 09309-37010 Standard depth: 5.4 to 5.8 mm (0.213 to 0.228 in.) NOTICE:
|
![]() |
4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(See page
)
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

