Toyota Tacoma Quiz
Tire And Wheel

Inspection

In this manual: Tire And Wheel
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~2min read
INSPECTION PROCEDURE

1. INSPECT TIRES

(a) Check the tires for wear and proper inflation pressure.

Standard Cold Tire Inflation Pressure:

Tire Size

Front Wheel

kPa (kgf/cm2, psi)

Rear Wheel

kPa (kgf/cm2, psi)

Spare Wheel

kPa (kgf/cm2, psi)

P245/75R16 109S

220 (2.2, 32)

220 (2.2, 32)

220 (2.2, 32)

P265/70R16 112T

210 (2.1, 30)

210 (2.1, 30)

210 (2.1, 30)

P265/65R17 110S

200 (2.0, 29)

200 (2.0, 29)

200 (2.0, 29)

P265/60R18 109H

200 (2.0, 29)

200 (2.0, 29)

200 (2.0, 29)

(b) Using a dial indicator, check the tire runout.

Standard Tire Runout:

Vertical

3.0 mm (0.118 in.) or less

Lateral

3.0 mm (0.118 in.) or less

2. ROTATE TIRES

HINT:

Rotate the tires as shown in the illustration.

Text in Illustration

*A

for North America

*B

Except North America

*a

Overhead View

Front of Vehicle

3. INSPECT WHEEL BALANCE

(a) Check and adjust the off-car balance.

(1) for Steel Wheel Type:

Maximum imbalance after adjustment:

8.0 g (0.0176 lb)

(2) for Aluminum Wheel Type:

Maximum imbalance after adjustment:

8.0 g (0.0176 lb)

NOTICE:

  • Remove dirt, oil and water from the balance weight surface with cleaning detergent.
  • Do not touch the adhesive part of the balance weight.
  • Adhere the sticking type balance weight to the flat surface (A) shown in the illustration.

    Width (A):

    25 mm (0.984 in.)

  • Push the balance weight securely with a finger to adhere it to the position.

    Pushing force:

    10 kgf/more than 2 seconds

  • Do not reuse the balance weight.

HINT:

The inner side balance weight should be installed by clipping it to the rim.

(b) If necessary, check and adjust the on-car balance.

Standard imbalance after adjustment:

8.0 g (0.0176 lb) or less

4. INSPECT FRONT AXLE HUB BEARING

5. INSPECT REAR AXLE HUB BEARING

5. INSPECT REAR AXLE HUB BEARING

Precaution

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.