Installation

INSTALLATION PROCEDURE

1. INSTALL REAR AXLE SHAFT OIL SEAL

(a) Using SST and a hammer, install a new oil seal.

SST: 09950-60020

09951-00770

SST: 09950-70010

09951-07150

2. INSTALL REAR AXLE SHAFT WITH BACKING PLATE

(a) Install a new O-ring.

(b) Install the rear axle shaft with backing plate with the 4 nuts.

Torque:

45 N·m {459 kgf·cm, 33 ft·lbf}

3. INSTALL REAR BRAKE TUBE NO. 8

(a) Using a union nut wrench, connect the brake tube.

Torque:

15 N·m {155 kgf·cm, 11 ft·lbf}

4. INSTALL PARKING BRAKE CABLE ASSEMBLY NO. 3

(a) Install the parking brake cable with the 2 bolts onto the backing plate.

Torque:

8 N·m {82 kgf·cm, 71 in·lbf}

5. INSTALL REAR SPEED SENSOR

Click here

6. APPLY HIGH TEMPERATURE GREASE

Click here

7. INSTALL REAR BRAKE SHOE

Click here

8. INSTALL FRONT BRAKE SHOE

Click here

9. INSPECT REAR DRUM BRAKE INSTALLATION

Click here

10. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

Click here

11. ADJUST REAR DRUM BRAKE SHOE CLEARANCE

Click here

12. INSTALL REAR WHEEL

Torque:

113 N·m {1152 kgf·cm, 83 ft·lbf}

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

14. FILL RESERVOIR WITH BRAKE FLUID (for Hydraulic Brake Booster)

Click here

15. FILL RESERVOIR WITH BRAKE FLUID (for Vacuum Brake Booster)

Click here

16. BLEED MASTER CYLINDER (for Vacuum Brake Booster)

Click here

17. BLEED BRAKE LINE (for Hydraulic Brake Booster)

Click here

18. BLEED BRAKE LINE (for Vacuum Brake Booster)

Click here

19. INSPECT FLUID LEVEL IN RESERVOIR (for Hydraulic Brake Booster)

Click here

20. INSPECT FLUID LEVEL IN RESERVOIR (for Vacuum Brake Booster)

Click here

21. INSPECT FOR BRAKE FLUID LEAK

22. INSPECT PARKING BRAKE LEVER TRAVEL

Click here

23. ADJUST PARKING BRAKE LEVER TRAVEL

Click here

24. CHECK VSC SENSOR SIGNAL (for Hydraulic Brake Booster)

Click here

25. CHECK VSC SENSOR SIGNAL (for Vacuum Brake Booster)

Click here