Installation

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

1. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP

(a) Engage the 6 claws to install the rear door glass outer weatherstrip.

(b) Remove the protective tape.

2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

Click here

3. INSTALL REAR DOOR GLASS RUN

Click here

4. INSTALL REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY

Click here

5. INSTALL HOLE PLUG

Click here

6. INSTALL NO. 2 REAR DOOR SERVICE HOLE COVER

Click here

7. INSTALL REAR DOOR SERVICE HOLE COVER

Click here

8. INSTALL NO. 1 DOOR TRIM BRACKET

Click here

9. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

Click here

10. INSTALL REAR DOOR ARMREST BASE UPPER PANEL

Click here

11. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

Click here

12. INSTALL REAR DOOR FRAME GARNISH

Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

14. INSPECT POWER WINDOW OPERATION

Click here