Installation

1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

HINT:

Use the same procedure for the side.

(a) Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

Torque:

30 N·m {306 kgf·cm, 22 ft·lbf}

(b) Reinstall the floor carpet.

2. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Install the 2 rear seat headrest assemblies with the 8 bolts.

Torque:

20 N·m {204 kgf·cm, 15 ft·lbf}

3. INSTALL NO. 3 ROOM PARTITION COVER

4. INSTALL NO. 4 ROOM PARTITION COVER LH

5. INSTALL NO. 4 ROOM PARTITION COVER RH

6. INSTALL BACK PANEL TRIM

7. INSTALL BACK PANEL GARNISH HOLE PLUG

8. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Install the 2 rear seat cushion assemblies with the 6 bolts.

Torque:

30 N·m {306 kgf·cm, 22 ft·lbf}