Reassembly

HINT:

The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.

1. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY

(a) Install the rear seat cushion frame sub-assembly to the rear seat cushion pad.

2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER

(a) Install the separate type rear seat cushion cover.

(b) Engage the hook.

3. INSTALL REAR SEAT LOCK ASSEMBLY

(a) Temporarily install the rear seat lock assembly with the bolt.

4. INSTALL REAR SEAT CUSHION SUPPORT BRACKET SUB-ASSEMBLY

(a) Temporarily install the rear seat cushion support bracket sub-assembly with the 2 bolts.

(b) Using T30 "TORX" socket wrench, tighten bolt A.

Torque:

13 N·m {133 kgf·cm, 10 ft·lbf}

(c) Tighten bolt B.

Torque:

18 N·m {184 kgf·cm, 13 ft·lbf}

(d) Tighten bolt C.

Torque:

7 N·m {71 kgf·cm, 62 in·lbf}

5. INSTALL REAR SEAT LOCK HANDLE

(a) Engage the claw and install the rear seat lock handle.

6. INSTALL REAR SEAT HINGE SUB-ASSEMBLY

(a) Install the rear seat hinge sub-assembly with the bolt. Torque: 18 N·m {184 kgf·cm, 13 ft·lbf}

7. INSTALL REAR SEAT CUSHION COVER

(a) Install the rear seat cushion cover with the screw.

8. INSTALL REAR SEAT CUSHION UNDER COVER

(a) Install the rear seat cushion under cover with the screw.

9. INSTALL REAR SEATBACK LOCK COVER

(a) Install the rear seatback lock cover with the 2 screws.

10. INSTALL REAR SEATBACK COVER

(a) Engage the 2 claws and install the rear seatback cover.

(b) Install the 2 screws.