Lost Communication with Alternator Missing Message (P161A87)
The ECM communicates with the generator assembly via LIN communication. If a LIN communication error is detected, the ECM stores this DTC.
DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
P161A87 |
Generator assembly or ECM communication stop for about 17 minutes or more with the ignition switch ON. (1 trip detection logic) |
|
PROCEDURE
CHECK CHARGING SYSTEM
(a) Check the charging system (See page
).
| NG | ![]() |
REPAIR OR REPLACE CHARGING SYSTEM |
|
CHECK HARNESS AND CONNECTOR (ECM - GENERATOR ASSEMBLY)
(a) Disconnect the E9 ECM connector.
(b) Disconnect the G2 generator assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
E9-34 (LIN) - G2-2 (LIN) |
Always |
Below 1 Ω |
E9-34 (LIN) or G2-2 (LIN) - Body ground |
Always |
10 kΩ or higher |
| OK | ![]() |
REPLACE GENERATOR ASSEMBLY |
| NG | ![]() |
REPAIR OR REPLACE HARNESS OR CONNECTOR |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
.gif)
.gif)