Toyota Tacoma Quiz
Seat Belt

Rear Seat Inner Belt Assembly(for Double Cab)

In this manual: Seat Belt
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
0204060801004231N·mlb·ft
Tightening torque found on this page
Installation INSTALLATION PROCEDURE

1. INSTALL REAR SEAT INNER BELT ASSEMBLY

(a) for LH Side:

(1) Install the rear seat inner belt assembly with the bolt.

Text in Illustration

*a

Protruding Part

*b

40°

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

  • Make sure that the rear seat inner belt assembly is oriented in the correct direction when installing.
  • Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding part of the floor panel.

(b) for RH Side:

(1) Connect the rear seat inner belt assembly and rear center seat outer belt assembly by installing the floor anchor with the bolt.

Text in Illustration

*a

Protruding Part

*b

40°

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

  • Make sure that the rear seat inner belt assembly and rear center seat outer belt assembly is oriented in the correct direction when installing.
  • Do not allow the anchor part of the rear seat inner belt assembly and rear center seat outer belt assembly to overlap the protruding part of the floor panel.
Removal REMOVAL PROCEDURE

1. REMOVE REAR SEAT INNER BELT ASSEMBLY

(a) for LH Side:

(1) Remove the bolt and rear seat inner belt assembly.

(b) for RH Side:

(1) Remove the bolt and rear seat inner belt assembly.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.