Toyota Tacoma Quiz
Propeller Shaft

Removal

In this manual: Propeller Shaft
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
REMOVAL PROCEDURE

1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

(a) Place matchmarks on the propeller shaft flange yoke and differential flange.

Text in Illustration

*a

Matchmark

(b) for Differential Type BD20:

(1) Remove the 4 nuts, 4 bolts and 4 washers to disconnect the propeller shaft.

(c) for Differential Type BD22:

(1) Remove the 4 nuts and 4 washers to disconnect the propeller shaft.

(d) Remove the 2 bolts to separate the center No. 2 support bearing assembly from the frame crossmember.

(e) Place matchmarks on the propeller shaft flange yoke and transfer flange.

Text in Illustration

*a

Matchmark

(f) Remove the 4 nuts, 4 washers and propeller shaft.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.