Removal

1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package)

2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

3. REMOVE FAN AND GENERATOR V BELT

4. DRAIN POWER STEERING FLUID

5. REMOVE FRONT FENDER APRON UPPER SEAL RH

6. DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE

(a) Slide the clip and disconnect the No. 1 oil reservoir to pump hose.

7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY

(a) Disconnect the oil pressure switch connector.

(b) Remove the union bolt to disconnect the pressure feed tube assembly.

(c) Remove the gasket from the pressure feed tube assembly.

8. REMOVE VANE PUMP ASSEMBLY

(a) Remove the bolt to disconnect the ground wire.

(b) Remove the 2 bolts and vane pump assembly.