2gr-fks Engine Mechanical
Replacement
In this manual: 2gr-fks Engine Mechanical
~1min read
REPLACEMENT PROCEDURE
Text in Illustration
1. REPLACE STRAIGHT PIN
NOTICE:
It is not necessary to remove the straight pin unless it is being replaced.
(a) Using a plastic-faced hammer, tap in new straight pins to the cylinder block.
Text in Illustration *A |
Front Side |
*B |
Rear Side |
*C |
Upper Side |
*D |
Lower Side |
Standard Protrusion:
Item | Specified Condition |
|---|---|
Pin A |
22.5 to 23.5 mm (0.886 to 0.925 in.) |
Pin B |
10.5 to 11.5 mm (0.413 to 0.453 in.) |
Pin C |
8.5 to 9.5 mm (0.335 to 0.374 in.) |
Pin D |
5.5 to 6.5 mm (0.217 to 0.256 in.) |
2. REPLACE STUD BOLT
NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.
(a) Using an E8 "TORX" socket wrench, install the stud bolts. Text in Illustration
Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} |
![]() |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
