Theft Deterrent

Theft Deterrent System is not Unset when Engine is Running

~1min read
DESCRIPTION

The theft deterrent system is unset when the IG signal and engine speed signal are input to the main body ECU (multiplex network body ECU) for 2 seconds or more continuously.

The engine speed signal is sent from the ECM to the main body ECU (multiplex network body ECU). For this reason, if there is an abnormality in an ECU or wire harness, the system may not function correctly.

WIRING DIAGRAM CAUTION / NOTICE / HINT CAUTION / NOTICE / HINT

NOTICE:

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration (See page ).*1
    • *1: w/ Smart Key System
  • Inspect the fuses for circuits related to this system before performing the following procedure.
PROCEDURE
  1. REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Replace the main body ECU (multiplex network body ECU) with a new one (See page ).

NEXT

END

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.