Toyota Tacoma Quiz
Vf2cm Transfer

Transfer Case Front Oil Seal

In this manual: Vf2cm Transfer
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
16special tools
Components COMPONENTS ILLUSTRATION Replacement Replacement REPLACEMENT PROCEDURE

1. DRAIN TRANSFER OIL

2. SUPPORT TRANSMISSION ASSEMBLY

2. SUPPORT TRANSMISSION ASSEMBLY

3. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY 3. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY

3. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY

4. REMOVE TRANSFER CASE LOWER PROTECTOR 4. REMOVE TRANSFER CASE LOWER PROTECTOR

4. REMOVE TRANSFER CASE LOWER PROTECTOR

5. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

5. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(See page 6. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY )

6. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

7. REMOVE TRANSFER CASE OIL SEAL

7. REMOVE TRANSFER CASE OIL SEAL

(a) Using SST, remove the transfer case oil seal.

SST: 09950-40011

09951-04020

09952-04010

09953-04030

09954-04010

09955-04031

09957-04010

09958-04011

Text in Illustration

*a

Turn

*b

Hold

NOTICE:

Apply a lubricant to the threads and end of SST.

8. INSTALL TRANSFER CASE OIL SEAL

(a) Coat the lip of a new transfer case oil seal with MP grease.

(b) Using SST and a hammer, install the transfer case oil seal until its metal ring contacts the case.

SST: 09710-30041

09710-03221

SST: 09950-60010

09951-00600

09951-00650

09952-06010

SST: 09950-70010

09951-07150

9. INSTALL OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

10. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

10. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(See page 11. INSTALL TRANSFER CASE LOWER PROTECTOR )

11. INSTALL TRANSFER CASE LOWER PROTECTOR

12. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY

12. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY

13. ADD TRANSFER OIL 13. ADD TRANSFER OIL

13. ADD TRANSFER OIL

14. INSPECT FOR TRANSFER OIL LEAK

14. INSPECT FOR TRANSFER OIL LEAK

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.