Vehicle Interior

Child Restraint Seat Anchor Bracket(for Crewmax Lh Side)

~1min read
010203040503324N·mlb·ft
Tightening torque found on this page

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY

(a) Install the 2 tether anchor bracket sub-assemblies with the 2 bolts.

Torque:

33 N·m {337 kgf·cm, 24 ft·lbf}

(b) Attach the 2 hooks of the separate type rear seatback cover.

2. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

3. INSTALL REAR SEAT HEADREST ASSEMBLY

4. INSTALL REAR SEAT ASSEMBLY LH

5. INSTALL REAR SEAT INNER BELT ASSEMBLY

6. INSTALL REAR SEAT ASSEMBLY RH

Removal

REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY RH

2. REMOVE REAR SEAT INNER BELT ASSEMBLY

3. REMOVE REAR SEAT ASSEMBLY LH

4. REMOVE REAR SEAT HEADREST ASSEMBLY

5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

6. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

(a) Detach the 2 hooks of the separate type rear seatback cover.

(b) Remove the 2 bolts and 2 tether anchor bracket sub-assemblies.