Vehicle Interior
Child Restraint Seat Anchor Bracket(for Double Cab)
In this manual: Vehicle Interior
~1min read
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
(a) Align the holes with the positioning pins and install the 3 anchor brackets with the 3 bolts.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
2. INSTALL REAR SEAT ASSEMBLY
(a) Install the rear seat (see page
).
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR SEAT ASSEMBLY
(a) Remove the rear seat (see page
).
2. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
(a) Remove the 3 bolts and 3 anchor brackets.
Was this page helpful?