Vehicle Interior
Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below. Air Conditioner
Display | Default | Contents | Setting |
Set Temperature Shift |
Normal |
Function to control the shifted temperature in relation to the displayed temperature |
+2 C / +1 C / Normal / -1 C / -2 C |
Compressor Mode |
Automatic |
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF |
Manual / Automatic |
Foot/DEF Auto Mode |
ON |
Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON |
OFF / ON |
Foot/DEF Automatic Blow Up Function |
ON |
Function to change the blower level automatically when the defroster is ON |
OFF / ON |
Ambient Temperature Shift |
Normal |
Function to control the shifted ambient temperature in relation to the displayed ambient temperature |
+3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C |
Add Foot Air in FACE Mode |
ON |
When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow. |
OFF / ON |
|
Was this page helpful?