In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / SRS Airbag / Data List.
(f) Read the Data List according to the display on the Techstream.
SRS Airbag
Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Driver Seat Position
Driver Seat Position/
Forward: Seat position is forward
Backward: Seat position is backward
Fail: Failure is detected
Forward, Backward
-
Passenger Classification
Front Passenger Classification/
NG: Data is not determined
Child: Child is seated or vacant
AF05: Adult is seated
AM50: Adult is seated
Fail: Failure is detected
Child/AF05/AM50
-
Left side Buckle SW
Front seat belt LH/
Unset: Front seat belt LH not fastened
Set: Front seat inner belt LH fastened
NG: Data is not determined
Unset/Set
-
Right side Buckle SW
Front seat belt RH/
Unset: Front seat belt RH not fastened
Set: Front seat belt RH fastened
NG: Data is not determined
Unset/Set
-
Display Type Information
Display Type Information/
LR: Display is indicated by LH / RH
DP: Display is indicated by Driver Side / Front Passenger Side