Vehicle Interior
Disassembly
In this manual: Vehicle Interior
~1min read
1special tools
DISASSEMBLYPROCEDURE1. REMOVE COOLER COMPRESSOR BRACKET
(b) Remove the screw and the cooler compressor bracket. 2. REMOVE MAGNET CLUTCH ASSEMBLY
(b) Using SST, hold the magnet clutch hub. SST: 09985-00270 (c) Remove the bolt, magnet clutch hub and magnet clutch washer(s). HINT: There is no set number of magnet clutch washers since they are used for adjusting.
(e) Disconnect the connector.
|
Was this page helpful?



