DISASSEMBLY
PROCEDURE
1. REMOVE INTAKE VALVE
(a) Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.
SST: 09202-70020
09202-01010
09202-01020
SST: 09202-00021 |
 |
(b) Remove the retainer, compression spring and valve.
HINT:
Arrange the removed parts in the correct order.
2. REMOVE EXHAUST VALVE
(a) Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.
SST: 09202-70020
09202-01010
09202-01020
SST: 09202-00021 |
 |
(b) Remove the retainer, compression spring and valve.
HINT:
Arrange the removed parts in the correct order.
3. REMOVE VALVE STEM OIL SEAL
(a) Using needle-nose pliers, remove the oil seals. |
 |
4. REMOVE VALVE SPRING SEAT
(a) Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it. |
 |
5. REMOVE NO. 1 STRAIGHT SCREW PLUG
NOTICE:
If water leaks from the No. 1 screw plug or the plug is corroded, replace it.
(a) Using a 10 mm hexagon wrench, remove the 6 screw plugs and 6 gaskets. |
 |
6. REMOVE NO. 2 STRAIGHT SCREW PLUG
(a) Using a 14 mm hexagon wrench, remove the 2 screw plugs and 2 gaskets.
NOTICE:
If water leaks from the No. 2 screw plug or the plug is corroded, replace it. |
 |
7. REMOVE STUD BOLT
NOTICE:
If the stud bolt is deformed or its threads are damaged, replace it. |