Engine Hood Courtesy Switch
ComponentsCOMPONENTSILLUSTRATION
InspectionINSPECTIONPROCEDURE1. INSPECT HOOD LOCK ASSEMBLY (HOOD COURTESY SWITCH) Text in Illustration
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the results are not as specified, replace the hood lock assembly (hood courtesy switch). InstallationINSTALLATIONPROCEDURE1. INSTALL HOOD LOCK ASSEMBLY (a) Apply MP grease to the sliding areas of the hood lock assembly.
(b) Connect the hood lock control cable assembly. (c) Install the hood lock assembly. (d) Install the 3 bolts. Torque: 8 N·m {82 kgf·cm, 71 in·lbf} (e) Install a new hood lock nut cap. (f) Connect the connector. (g) Attach the clamp. 2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY RemovalREMOVALPROCEDURE1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY 2. REMOVE HOOD LOCK ASSEMBLY
(b) Detach the clamp.
(e) Remove the hood lock assembly. (f) Disconnect the hood lock control cable assembly. |


Text in Illustration


