Vehicle Interior
Security Horn Assembly
In this manual: Vehicle Interior
~1min read
ComponentsCOMPONENTSILLUSTRATION
InspectionINSPECTIONPROCEDURE1. INSPECT SECURITY HORN ASSEMBLY
(a) Apply battery voltage and check operation of the horn. OK:
If the result is not as specified, replace the security horn assembly. InstallationINSTALLATIONHINT: A bolt without a torque specification is shown in the standard bolt chart (See page PROCEDURE1. INSTALL SECURITY HORN ASSEMBLY (a) Install the security horn assembly with the bolt. (b) Connect the connector. RemovalREMOVALPROCEDURE1. REMOVE SECURITY HORN ASSEMBLY
(b) Remove the bolt and security horn assembly. |
Was this page helpful?
