Engine, Hybrid System
Extension Housing Rear Oil Seal
In this manual: Engine, Hybrid System
~1min read
4special tools
Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
PROCEDURE
1. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Remove the propeller shaft (See page
).
2. REMOVE EXTENSION HOUSING REAR OIL SEAL
(a) Using SST, remove the oil seal.
SST: 09308-00010
3. INSTALL EXTENSION HOUSING REAR OIL SEAL
(a) Coat the lip of a new oil seal with MP grease.
(b) Using SST and a hammer, tap in the oil seal.
SST: 09316-60011
09316-00011
09316-00051
Standard depth:
5.4 to 5.8 mm (0.213 to 0.228 in.)
4. INSTALL PROPELLER SHAFT ASSEMBLY
(a) Install the propeller shaft (See page
).
5. ADD AUTOMATIC TRANSMISSION FLUID
(a) Add automatic transmission fluid (See page
).
Was this page helpful?