Speed Sensor
ComponentsCOMPONENTSILLUSTRATION
InspectionINSPECTIONPROCEDURE1. INSPECT SPEED SENSOR NT
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the sensor. 2. INSPECT SPEED SENSOR SP2
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the sensor. InstallationINSTALLATIONPROCEDURE1. INSTALL SPEED SENSOR SP2
(a) Coat a new O-ring with ATF and install it to the sensor. (b) Install the sensor with the bolt. Torque: 5,4 N·m {55 kgf·cm, 48 in·lbf} (c) Connect the sensor connector. 2. INSTALL SPEED SENSOR NT
(a) Coat a new O-ring with ATF and install it to the sensor. (b) Install the sensor with the bolt. Torque: 5,4 N·m {55 kgf·cm, 48 in·lbf} (c) Connect the sensor connector. RemovalREMOVALPROCEDURE1. REMOVE SPEED SENSOR NT
(a) Disconnect the sensor connector. (b) Remove the bolt and sensor. (c) Remove the O-ring from the sensor. 2. REMOVE SPEED SENSOR SP2
(a) Disconnect the sensor connector. (b) Remove the bolt and sensor. (c) Remove the O-ring from the sensor. |