Vehicle Interior
Inspection
INSPECTION
PROCEDURE
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)
(a) Check the resistance.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
4 (VL) - 8 (B)
6 (M+) - 7 (E) |
UP |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
4 (VL) - 7 (E)
6 (M+) - 8 (B) |
DOWN |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
5 (HL) - 8 (B)
6 (M+) - 7 (E) |
LEFT |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
5 (HL) - 7 (E)
6 (M+) - 8 (B) |
RIGHT |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
Text in Illustration
*a |
Component without harness connected
(Outer Mirror Switch Assembly) |
If the result is not as specified, replace the outer mirror switch assembly.
(3) Select "R" on the left/right adjustment switch.
(4) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 (VR) - 8 (B)
6 (M+) - 7 (E) |
UP |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
3 (VR) - 7 (E)
6 (M+) - 8 (B) |
DOWN |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
2 (HR) - 8 (B)
6 (M+) - 7 (E) |
LEFT |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
2 (HR) - 7 (E)
6 (M+) - 8 (B) |
RIGHT |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
If the result is not as specified, replace the outer mirror switch assembly. |
 |
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror, w/ Memory)
(a) Inspect the outer mirror switch assembly.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 (M+) - 2 (E1) |
UP |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
DOWN |
Pressed |
470 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
LEFT |
Pressed |
800 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
RIGHT |
Pressed |
250 Ω |
Not pressed |
10 kΩ or higher |
1 (MSW) - 2 (E1) |
L switch |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
Text in Illustration
*a |
Component without harness connected
(Outer Mirror Switch Assembly) |
If the result is not as specified, replace the outer mirror switch assembly.
(3) Select "R" on the left/right adjustment switch.
(4) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 (M+) - 2 (E1) |
UP |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
DOWN |
Pressed |
470 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
LEFT |
Pressed |
800 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
RIGHT |
Pressed |
250 Ω |
Not pressed |
10 kΩ or higher |
1 (MSW) - 2 (E1) |
R switch |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
If the result is not as specified, replace the outer mirror switch assembly. |
 |
3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)
(a) Inspect the outer mirror switch assembly.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 (M+) - 2 (E1) |
UP |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
DOWN |
Pressed |
470 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
LEFT |
Pressed |
800 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
RIGHT |
Pressed |
250 Ω |
Not pressed |
10 kΩ or higher |
1 (MSW) - 2 (E1) |
L switch |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
Text in Illustration
*a |
Component without harness connected
(Outer Mirror Switch Assembly) |
If the result is not as specified, replace the outer mirror switch assembly.
(3) Select "R" on the left/right adjustment switch.
(4) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 (M+) - 2 (E1) |
UP |
Pressed |
100 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
DOWN |
Pressed |
470 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
LEFT |
Pressed |
800 Ω |
Not pressed |
10 kΩ or higher |
3 (M+) - 2 (E1) |
RIGHT |
Pressed |
250 Ω |
Not pressed |
10 kΩ or higher |
1 (MSW) - 2 (E1) |
R switch |
Pressed |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
If the result is not as specified, replace the outer mirror switch assembly. |
 |
(b) Inspect the retract switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
6 (B) - 7 (MR)
8 (MF) - 4 (E2) |
Pressed
(Retracts) |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
6 (B) - 8 (MF)
4 (E2) - 7 (MR) |
Pressed
(Driving position) |
Below 1 Ω |
Not pressed |
10 kΩ or higher |
If the result is not as specified, replace the outer mirror switch assembly. |
Was this page helpful?