Vehicle Interior
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Check the resistance of the front seat cushion heater assembly LH.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 - 5 |
Seat cushion heater temperature 23 °C |
2.89 to 3.53 Ω |
If the result is not as specified, replace the front seat cushion heater assembly LH. Text in Illustration
*a |
Component without wire harness connected
(Front Seat Cushion Heater Assembly LH) |
|
 |
2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
(a) Check the resistance of the front seat cushion heater assembly RH.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
3 - 5 |
Seat cushion heater temperature 23 °C |
2.89 to 3.53 Ω |
If the result is not as specified, replace the front seat cushion heater assembly RH. Text in Illustration
*a |
Component without wire harness connected
(Front Seat Cushion Heater Assembly RH) |
|
 |
|
Was this page helpful?