Vehicle Interior
Installation
In this manual: Vehicle Interior
~1min read
INSTALLATIONPROCEDURE1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) (a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the "TORX" screw. Torque: 1,2 N·m {12 kgf·cm, 11 in·lbf}
(b) Connect the connector. 2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
(b) Attach the 2 claws to install the inner rear view mirror stay holder cover as shown in the illustration. 3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw. Torque: 1,2 N·m {12 kgf·cm, 11 in·lbf} |
Was this page helpful?


