Vehicle Interior
Installation
In this manual: Vehicle Interior
~1min read
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (See page
).
PROCEDURE
1. INSTALL FRONT POWER SEAT SWITCH LH
(a) Install the front power seat switch LH with the 3 screws.
2. INSTALL RECLINING POWER SEAT SWITCH KNOB

3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

4. INSTALL FRONT SEAT CUSHION SHIELD LH

5. INSTALL FRONT SEAT ASSEMBLY LH
(See page
)
Was this page helpful?