Vehicle Interior
Installation
Tightening torque found on this page
INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT ASSEMBLY
(a) Attach the 4 hooks on the back side of the rear seat assembly and install it.
NOTICE:
Be careful not to damage the vehicle body. |
 |
(b) Install the 6 bolts in the order indicated in the illustration.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf} |
 |
2. INSTALL REAR SEAT INNER BELT ASSEMBLY
(a) Insert the rear seat inner belt assemblies. |
 |
3. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
4. INSTALL SEAT FLOOR BOX (w/ Seat Under Tray)
(a) Attach the claw to install the seat floor box.
(b) Install the 4 knobs.
5. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Seat Under Tray)
(a) Attach the 2 hooks to install the luggage compartment side cover sub-assembly RH. |
 |
(b) Close the luggage compartment side cover sub-assembly RH and turn the knob.
6. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Seat Under Tray)
(a) Attach the 3 hooks to install the luggage compartment side cover sub-assembly LH. |
 |
(b) Close the luggage compartment side cover sub-assembly LH and turn the knob.
(c) Pull the 2 seat adjusting handles and fold down the seat cushion. |
 |
|
Was this page helpful?