Brake
Installation
In this manual: Brake
~1min read
INSTALLATION
PROCEDURE
1. INSTALL TRAILER BRAKE CONTROL ECU (BRAKE CONTROL WITH BRACKET RELAY)
(a) Connect the connector.
(b) Install the trailer brake control switch with the 2 bolts.
Torque:
xx N*m (xx kgf*cm, xx in.*lbf)
2. INSTALL NO. 2 SWITCH HOLE BASE

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

4. INSTALL COWL SIDE TRIM BOARD LH

5. INSTALL FRONT DOOR SCUFF PLATE LH
- for CrewMax: Click here

- for Double Cab: Click here

6. INSTALL INSTRUMENT SIDE PANEL LH

Was this page helpful?