(a) Apply lithium soap base glycol grease to the entire circumference of a new brake master cylinder seal.
(b) Install the brake master cylinder seal onto the brake master cylinder.
(c) Install the brake master cylinder with 2 new nuts.
Torque:
25 N·m {255 kgf·cm, 18 ft·lbf}
2. CONNECT FRONT NO. 1 BRAKE TUBE
(a) Using a union nut wrench, connect the brake tube (labeled A) to the brake master cylinder.
Torque:
Specified tightening torque :
19,5 N·m {199 kgf·cm, 14 ft·lbf}
HINT:
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 17.6 N*m (179 kgf*cm, 13 ft.*lbf)
*a
Torque Wrench Fulcrum Length
*b
Union Nut Wrench
3. CONNECT REAR NO. 1 BRAKE TUBE
(a) Using a union nut wrench, connect the brake tube (labeled B) to the brake master cylinder.
Torque:
Specified tightening torque :
19,5 N·m {199 kgf·cm, 14 ft·lbf}
HINT:
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 17.6 N*m (179 kgf*cm, 13 ft.*lbf)