Engine, Hybrid System
Removal
In this manual: Engine, Hybrid System
~1min read
REMOVALPROCEDURE1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH (See page 4. REMOVE STARTER COVER
5. REMOVE STARTER ASSEMBLY
(b) Disconnect the starter connector. (c) Remove the nut and disconnect the starter wire.
|
Was this page helpful?



