Engine, Hybrid System

Removal

~1min read

REMOVAL

PROCEDURE

1. REMOVE FRONT WHEELS

2. REMOVE NO. 1 ENGINE UNDER COVER

3. DRAIN DIFFERENTIAL OIL

4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(See page )

5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

(See page )

6. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.

7. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY

(a) Remove the bolt and disconnect the front differential breather tube bracket.

(b) Disconnect the differential actuator hose.

(c) Disconnect the differential actuator connector.

(d) Support the front differential with a jack.

(e) Remove the A, B, C, D and E bolts.

(f) Slowly lower the jack, and remove the front differential carrier.

(g) Remove the F and G bolts, and differential support.