Engine, Hybrid System
Removal
In this manual: Engine, Hybrid System
~1min read
2special tools
REMOVALPROCEDURE1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
(a) Place matchmarks on the propeller shaft flange and differential flange. Text in Illustration
(b) Remove the 4 bolts and 4 nuts. Then disconnect the propeller shaft from the differential side.
(d) w/ Bearing Washer: Remove the 2 mounting bolts and 2 bearing washers from the crossmember. (e) Remove the propeller shaft.
|
Was this page helpful?


