Vehicle Interior

Removal

~1min read

REMOVAL

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

2. REMOVE FRONT UPPER ARMREST BASE PANEL LH

3. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

5. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

(a) w/ Power Mirror Control System:

Disconnect the connector labeled A.

(b) Remove the 3 nuts.

(c) Detach the claw and remove the outer rear view mirror assembly.

6. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY

7. REMOVE OUTER MIRROR LIGHT ASSEMBLY LH (for Standard)

8. REMOVE OUTER MIRROR COVER (for Standard)

(a) Detach the 4 claws labeled A.

(b) Slightly lift up the cover to detach the 3 claws labeled B and remove the outer mirror cover.

9. REMOVE SIDE TURN SIGNAL LIGHT LENS (for Extended Type)

10. REMOVE OUTER MIRROR COVER LH (for Extended Type)

(a) Detach the 2 claws and remove the outer mirror cover LH.