Audio, Visual, Telematics

Removal

~1min read

REMOVAL

NOTICE:

  • Avoid any impact to the blind spot monitor sensor.
  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

PROCEDURE

1. REMOVE REAR BUMPER COVER

Click here

2. REMOVE REAR BUMPER PLATE LH

Click here

3. REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.

4. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH

Click here

5. REMOVE REAR BUMPER EXTENSION INSERT LH

Click here

6. REMOVE REAR BUMPER EXTENSION INSERT RH

Click here

7. REMOVE BLIND SPOT MONITOR SENSOR LH

(a) Disconnect the connector and detach the wire harness clamp.

(b) Remove the 3 nuts and blind spot monitor sensor LH.

Text in Illustration

Nut

Connector

8. REMOVE BLIND SPOT MONITOR SENSOR RH

HINT:

Use the same procedure described for the LH side.

9. REMOVE BLIND SPOT MONITOR BRACKET LH

(a) Remove the 3 nuts and blind spot monitor bracket LH.

10. REMOVE BLIND SPOT MONITOR BRACKET RH

HINT:

Use the same procedure described for the LH side.