When the volume of washer fluid decreases below a certain level (when the washer fluid level warning switch is turned ON), the combination meter warns the driver through the warning message on the combination meter.
WIRING DIAGRAM
PROCEDURE
READ VALUE USING TECHSTREAM (WASHER FLUID LEVEL WARNING SWITCH)
(a) Check the Data List for proper functioning of the washer fluid level warning switch.
Combination Meter
Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Washer Switch
Washer fluid level warning switch / ON or OFF
ON: Washer jar is empty
OFF: Washer jar is full
-
OK:
On screen, each item changes between ON and OFF according to above chart.
OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG
CHECK WASHER FLUID LEVEL WARNING SWITCH ASSEMBLY
(a) Disconnect the A27 switch connector.
(b) Measure the resistance according to the value(s) in the table below.