Air conditioning filter

Vehicles with smart key system:

Turn the “ENGINE START STOP” switch off.

Vehicles without smart key system:

Turn the engine switch to the “LOCK” position.

Open the glove box. Slide off the damper.

Push each side of the glove box to release the pins. Then disconnect the claws at the bottom and remove the glove box.

Remove the filter cover.

Remove the air conditioning filter and replace it with a new one.

The “↑UP” marks shown on the filter should be pointing up.

Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow early replacement may be required. (For scheduled maintenance information, refer to the “Scheduled Maintenance Guide”, “Owner’s Manual Supplement”.)

The filter may be clogged. Check the filter and replace if necessary.

When using the air conditioning system, make sure that a filter is always installed.