Diagnosis System
1. CHECK DLC3
(a) Check the DLC3 (See page
).
2. FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
(a) Initial check.
(1) Turn the ignition switch to ON.
(2) The passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for approximately 2 seconds.
(3) Approximately 6 seconds after the ignition switch is turned to ON, the passenger airbag ON/OFF indicator will show ON or OFF depending on the conditions listed below.
Front Passenger Seat Condition | Passenger Airbag ON/OFF Indicator | SRS Warning Light |
|
|---|---|---|---|
ON Indicator | OFF Indicator |
||
Vacant |
OFF |
OFF |
OFF |
Adult is seated. |
ON |
OFF |
OFF |
Child is seated. |
OFF |
ON |
OFF |
Child restraint system is set. |
OFF |
ON |
OFF |
Occupant classification system failure |
OFF |
ON |
ON |
HINT:
- The passenger airbag ON/OFF indicator is based on the timing chart below in order to check the indicator light circuit.
- When the occupant classification system has trouble, both the SRS warning light and passenger airbag ON/OFF indicator ("OFF") come on. In this case, check the DTCs in the airbag system first.
3. CHECK PASSENGER AIRBAG ON/OFF INDICATOR
(a) Turn the ignition switch to ON.
(b) Check that the passenger airbag ON/OFF indicator (ON and OFF) comes on for approximately 4 seconds, then goes off for approximately 2 seconds.
HINT:
Refer to the table in step 3 regarding the passenger airbag ON/OFF indicator when the ignition switch is turned to ON and approximately 6 seconds pass.
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.