Toyota Venza: Front Seat Inner Belt Assembly

Components COMPONENTS ILLUSTRATION

ILLUSTRATION

Inspection INSPECTION PROCEDURE

1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (w/ Seat Position Memory System)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
4 - 5	Driver seat belt unfastened	10 kΩ or higher
4 - 5	Driver seat belt fastened	Below 1 Ω

Text in Illustration

*a	Component without harness connected (Front Seat Inner Belt Assembly LH)

If the result is not as specified, replace the front seat inner belt assembly LH.

Removal REMOVAL PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

(See page )

2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

(See page )

3. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)

(a) Disconnect the connector and disengage each clamp.

(b) Remove the nut and front seat inner belt assembly.

4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

(a) Disconnect each connector and disengage each clamp.

(b) Remove the nut and front seat inner belt assembly.

5. REMOVE FRONT SEAT BELT ANCHOR PLATE

(a) Remove the front seat belt anchor plate.

Installation INSTALLATION PROCEDURE

1. INSTALL FRONT SEAT BELT ANCHOR PLATE

(a) Install the front seat belt anchor plate.

2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)

(a) Install the front seat inner belt assembly with the nut.

Text in Illustration

*1	Protruding Part

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect the connector and engage each clamp.

3. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

(a) Install the front seat inner belt assembly with the nut.

Text in Illustration

*1	Protruding Part

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect each connector and engage each clamp.

4. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

(See page )

5. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)

(See page )

Front Seat Inner Belt Assembly

Test yourself