Installation

1. INSTALL STARTER ASSEMBLY

(a) Install the starter with the 2 bolts. Torque: 37 N·m {377 kgf·cm, 27 ft·lbf}

(b) Connect the starter connector.

(c) Install the terminal nut and cover the nut with the cap.

Torque:

9,8 N·m {100 kgf·cm, 87 in·lbf}

2. INSTALL BATTERY

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

4. INSTALL COOL AIR INTAKE DUCT SEAL

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).