Installation

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)

(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

Torque:

1,5 N·m {15 kgf·cm, 13 in·lbf}

(b) Connect the connector.

2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

NOTICE:

• Do not touch the camera lens (built into the inner rear view mirror assembly) with a bare hand.
• Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
• Do not apply strong impacts to the inner rear view mirror assembly.
• Do not allow any liquid to get on the inner rear view mirror assembly.

(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

Torque:

1,5 N·m {15 kgf·cm, 13 in·lbf}

(b) Connect the connector.

3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER

(a) Engage the 2 claws.

(b) Slide the inner rear view mirror stay holder cover and engage the 2 claws and install the cover as shown in the illustration.