Brake System (other)
Installation
In this manual: Brake System (other)
~1min read
INSTALLATION PROCEDURE
.gif)
.gif)
1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Install the brake pedal support assembly to the instrument panel reinforcement with the bolt. Torque: 19 N·m {195 kgf·cm, 14 ft·lbf} |
![]() |
(b) Connect the connector. |
![]() |
2. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
3. INSTALL STOP LIGHT SWITCH ASSEMBLY
.gif)
4. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (w/ HID Headlight System)
.gif)
5. INSTALL BRAKE BOOSTER ASSEMBLY
HINT:
Refer to the instructions for Installation of the brake booster assembly (See page
).
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.png)
.png)