Toyota Venza Quiz
1ar-fe Cooling

Installation

In this manual: 1ar-fe Cooling
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
010203040502.62N·mlb·ft
Tightening torque found on this page
INSTALLATION PROCEDURE

1. INSTALL NO. 2 COOLING FAN MOTOR

(a) Install the No. 2 cooling fan motor with the 3 screws.

Torque:

w/o Towing package :

2,6 N·m {26 kgf·cm, 23 in·lbf}

w/ Towing package :

3,9 N·m {40 kgf·cm, 35 in·lbf}

(b) Connect the No. 2 cooling fan motor connector and 2 clamps.

2. INSTALL COOLING FAN MOTOR

(a) Install the cooling fan motor with the 3 screws.

Torque:

w/o Towing package :

2,6 N·m {26 kgf·cm, 23 in·lbf}

w/ Towing package :

3,9 N·m {40 kgf·cm, 35 in·lbf}

3. INSTALL COOLING FAN MOTOR INSULATOR

(a) Install the cooling fan motor insulator with the 2 bolts.

Torque:

2,6 N·m {26 kgf·cm, 23 in·lbf}

4. INSTALL NO. 2 FAN

(a) Install the No. 2 fan with the nut.

Torque:

6,3 N·m {64 kgf·cm, 56 in·lbf}

5. INSTALL FAN

(a) Install the fan with the nut.

Torque:

6,3 N·m {64 kgf·cm, 56 in·lbf}

6. INSTALL RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR

HINT:

See page

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.